E_S4HCON2020 Certification Exam Dumps Questions in here [Feb-2022]
Updated E_S4HCON2020 Exam Practice Test Questions
NEW QUESTION 19
In ICNV. How database operations synchronized between the source and the target table?
- A. AA
- B. Deletes are directly executed in the target table by delete trigger.
Answer: B
NEW QUESTION 20
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Configure it within transaction ATC
- B. Download it from SAP Support Portal
- C. Apply the corresponding SAP note via SAP Note Assistant
- D. Generate it by analyzing the specific custom code via RFC
Answer: B
NEW QUESTION 21
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above?
There are 3 correct answers to this question.
Response:
- A. Dual Stack split
- B. Release upgrade
- C. Database migration
- D. Support Package Stack update
- E. Homogenous system copy
Answer: B,C,D
NEW QUESTION 22
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. ATC (ABAP Test Cockpit)
- B. SYCM (Simplification Database Content)
- C. SE80 (Object Navigator)
- D. SAT (Runtime Analysis)
Answer: A,C
NEW QUESTION 23
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the corresponding R3trans log files of this phase
- B. In the job log for the corresponding job in SM37 (Job Overview)
- C. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
Answer: B,C
NEW QUESTION 24
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host agent determine the path to the SUM directory?
- A. The path was stored in file sumabap.conf during registration
- B. AA
Answer: A
NEW QUESTION 25
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. You need to build up a SI check framework by applying SAP notes.
- B. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
- C. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- D. Depending on the SAP S/4HANA version, there are different SI check frameworks.
Answer: A,D
NEW QUESTION 26
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:
- A. The repository is migrated in uptime
- B. An additional temporary database is used during uptime
- C. Dedicated application tables are migrated in uptime
- D. TABIM_UPG is executed in uptime
Answer: C
NEW QUESTION 27
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Delete client 066 (Early Watch Client)
- B. Uninstall Fiori apps not released for SAP_UI 7.50
- C. Uninstall industry extensions not supported by SAP S/4HANA
- D. Install add-on SAP Gateway 7.50
Answer: A,B
NEW QUESTION 28
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can record the modification adjustment during migration and use the transports in the next runs.
- B. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- C. You can verify that the content of the download directory matches the stack.XML file.
- D. You can find the optimal number of parallel R31oad processes by monitoring host performance.
Answer: B,D
NEW QUESTION 29
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.
- A. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
- B. The upgrade of the PRD must be finished before you start new development in the DEV.
- C. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- D. The transport between Unicode and non-Unicode systems is forbidden.
Answer: C
NEW QUESTION 30
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
- A. Post-downtime
- B. During downtime
- C. During uptime
- D. During SPDD
Answer: A,C
NEW QUESTION 31
You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:
- A. SUM without DMO
- B. SWPM using the Load procedure
- C. SUM with DMO
- D. SWPM using the Backup / Restore procedure
Answer: B
NEW QUESTION 32
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:
- A. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
- B. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
- C. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
- D. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.
Answer: A
NEW QUESTION 33
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are lost
- B. SUM continues with the next phase and your modifications are kept as In the start release
- C. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
- D. Before continuing with the next phase SUM asks for a modification adjustment transport
Answer: B
NEW QUESTION 34
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- B. By searching for transport requests named <SID>K0<number>
- C. By searching for transport requests that are assigned to the project SAP_ADJUST
- D. By searching for transport requests in the file umodauto.Ist
Answer: D
NEW QUESTION 35
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Breakpoint configuration file SAPUPPHAS.BRK
- B. MIGRATE J5T_DUR_XML file from a previous run
- C. Stack XML file calculated by the Maintenance Planner
- D. Parameter file SAPup_add.par
Answer: B,C
NEW QUESTION 36
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of SPAU modification adjustment
- B. Creation of the table structures in the new SAP HANA database
- C. Execution of XPRAs and AIMs
- D. Execution of SPDD modification adjustment
- E. Execution of eCATTs for business validation tests
Answer: A,C,E
NEW QUESTION 37
......
Pass SAP Certified Technology Specialist E_S4HCON2020 Exam With 55 Questions: https://itexambus.passleadervce.com/SAP-Certified-Technology-Specialist/reliable-E_S4HCON2020-exam-learning-guide.html