[Jan 27, 2022] Get New 5V0-22.21 Certification Practice Test Questions Exam Dumps
Real 5V0-22.21 Exam Dumps Questions Valid 5V0-22.21 Dumps PDF
VMware 5V0-22.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 34
All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:
Failures to Tolerate (FTT) rule is set to "2 Failures - RAID-1 (Mirroring)".
The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.
Which action should the vSAN administrator take to meet this goal?
- A. Change the FTT rule to "1 Failure - RAID-1 (Mirroring)", and select "Now" for Reapply to VMs.
- B. Disable Operations reserve and Host rebuild reserve and click "Apply".
- C. Add the "Flash read cache reservation" rule to the storage policy, and set to 0%.
- D. Modify the FTT rule to "2 Failures - RAID-5 (Erasure Coding)".
Answer: A
NEW QUESTION 35
A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.
Which action should the administrator take?
- A. Change the Default Storage Policy to have stripe width of 13.
- B. Increase the stripe width based on the number of capacity devices within the disk group.
- C. Add more magnetic capacity devices in the affected host.
- D. Modify the stripe width for the application on the advanced settings for the VM.
Answer: D
NEW QUESTION 36
An administrator has been tasked with physically moving the hosts in a vSAN 7.0 U1 cluster to an alternative location. All virtual machines, hosts, and the vCenter Server have need safely powered sown, and the servers have been relocated. Afterwards, the operations engineer needs to bring up the vSAN cluster again.
Which action is part of this process?
- A. Powering on each ESXi host from the vSphere Client
- B. Exiting Maintenance Mode on each ESXi host using the vSphere Host Client
- C. Entering Maintenance Mode with no data migration on each ESXi host
- D. Disabling the vCLS retreat mode
Answer: C
NEW QUESTION 37
A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.
What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)
- A. Add additional cache and capacity devices to the existing data nodes.
- B. Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.
- C. Add cache and capacity devices to the compute-only hosts.
- D. Add to the existing disk groups two cache devices and the eight capacity devices.
- E. Add additional compute-only hosts from the vSAN cluster.
Answer: C,D
NEW QUESTION 38
A vSAN administrator is looking at adding a new vSAN cluster with hosts that have 512GB memory.
What is the minimum requirement for the node's flash boot device?
- A. 4GB
- B. 16GB
- C. 128GB
- D. 32GB
Answer: B
NEW QUESTION 39
A newly deployed vSAN cluster runs vSAN 7.0, and the vSAN cluster needs an integration with a third-party software solution. The software solution provides full app-level redundancy, and it runs on the vSAN Data Persistence platform.
The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the vSAN Data Persistence platform third-party software solution.
Which type of storage policy configuration should the administrator use?
- A. A storage policy with tag or capability-based rules for vSAN Direct
- B. A storage policy with capability-based rules for third-party storage
- C. A vSAN shared nothing policy with no data redundancy (FTT=0)
- D. AvSAN storage policy with one failure to tolerate (N 1=1)
Answer: A
NEW QUESTION 40
After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.
The architect would like to know how many components will be created based on the following configuration:
2x 100 GB VMDK
RAID 1 vSAN Storage Policy
4x Point in Time snapshots
How many components will be created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 41
A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.
Which action is necessary to achieve this level of encryption?
- A. Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.
- B. Deploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level.
- C. Enable vSAN Cluster level encryption via Storage Policy. No KMS is required.
- D. Deploy KMS server, and enable vSAN Data at Rest encryption at the cluster level.
Answer: A
NEW QUESTION 42
An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?
- A. Set the Object Space Reservation rule to 100%.
- B. Enable TRIM/UN MAP for the vSAN cluster.
- C. Disable Storage I/O Control for the vSAN cluster.
- D. Reboot the VM to recreate the swap file.
Answer: B
NEW QUESTION 43
An organization wants to configure a new storage policy based on the following requirements:
Failures to tolerate = FTT 1/RAID-5 (Erasure Coding)
Number of disk stripes per object = 8
IOPS limit for object = 0
Object Space Reservation = Thin provisioning
Flash read cache reservation = 0%
Disable object checksum = No
Force provisioning = No
The administrator creates the policy using storage policy based management and assigns it to a 100GB virtual machine on a 4-node vSAN cluster to test the results of the new storage policy.
How many components will be created per host for the storage objects of the virtual machine on the vSAN datastore?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 44
A customer is running a number of compute-intensive application workloads on their existing 4-node vSAN cluster that has resulted in resource contention. To provide additional compute resources, the vSAN administrator has decided to deploy a new 4-node vSAN compute-only cluster so that a HCI Mesh can be configured.
Which three points would the vSAN administrator need to consider before using this configuration? (Choose three.)
- A. A storage policy of Erasure Coding with FTT=2 would be supported.
- B. The storage policy must be based on the number of hosts within the server cluster.
- C. A storage policy of Mirroring with FIT 1 would be supported.
- D. The storage policy must be based on the number of hosts within the client cluster.
- E. A storage policy of Erasure Coding with hi 1=1 would be supported.
- F. The storage policy is based on the total number of hosts across both client and server clusters.
Answer: B,C,E
NEW QUESTION 45
A vSAN administrator of a network isolated vSAN environment wants to upgrade the environment from the vSAN 7.0 to the vSAN 7.0 U1 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
- B. It is not possible to use the vSphere Lifecycle Manager on a network isolated environment.
- C. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- D. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
Answer: A
NEW QUESTION 46
After a recent security assessment, the security team recommended that vSAN encryption be enabled. The vSAN administrator will be adding a Key Management Server to vCenter.
What is a prerequisite to taking this action?
- A. Self-encryption drives
- B. IPv6 addressing
- C. Proxy server with username and password access
- D. Cryptographer ManageKeyServer permissions
Answer: D
NEW QUESTION 47
In vSAN 7.0 U1, when a host enters into maintenance mode (EMM) using the "Ensure Accessibility" option, it will allow vSAN to write to another host in addition to the host holding the object replica.
What does vSAN write to that additional host?
- A. All incremental updates that happened once the host entered maintenance mode
- B. A full replica and all incremental updates that happened once the host entered maintenance mode
- C. A full replica
- D. The stripe from the host entering maintenance mode
Answer: B
NEW QUESTION 48
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)
- A. Disable vSphere High Availability (HA).
- B. Reference the VMware Compatibility Guide.
- C. Create uniformly-configured hosts.
- D. Disable vSphere Cluster Services (vCLS).
- E. Disable vSAN performance service.
Answer: C,D
NEW QUESTION 49
A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).
Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?
- A. Stage the upgrade of the vSAN cluster through vLCM.
- B. Manually remediate one host at a time in the vSAN cluster.
- C. Place all hosts in the vSAN cluster into Maintenance Mode.
- D. Select Remediate All through vLCM to upgrade all hosts in the cluster.
Answer: B
NEW QUESTION 50
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Addon.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?
- A. Add an individual component to the vLCM image that has the updated NIC driver.
- B. Remove the Vendor Addon from the vLCM image, and then manually install the network driver on the servers.
- C. Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image is configured to use the most recent version of the vendor addon.
- D. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver.
Answer: A
NEW QUESTION 51
In a 2-node vSAN cluster, one node has recovered from failure with FTT=1 and RAID-1 storage policy.
Refer to the exhibit:
What is the total VMDK storage consumed?
- A. 150 GB
- B. 133GB
- C. 200GB
- D. 100GB
Answer: D
NEW QUESTION 52
A vSphere administrator wants to use vSphere Lifecycle Manager (vLCM) to manage a vSAN cluster with one desired image. When creating the new cluster, the administrator chooses "Manage all hosts in the cluster with a single image".
Which option is NOT available when setting up the cluster image?
- A. Import image from an existing host in the vCenter inventory
- B. Import image from new host
- C. Import baseline from vSphere Lifecycle Manager
- D. Compose a new image
Answer: D
NEW QUESTION 53
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics.
Which performance category should the vSAN administrator open?
- A. Resync Latency
- B. Host Network
- C. Disks
- D. Backend
Answer: D
NEW QUESTION 54
Which Storage Policy Structure Rule is supported by vSAN Direct Datastore?
- A. Enable tag/capacity-based placement rules
- B. Enable rules for vSAN storage
- C. Enable host-based rules
- D. Enable storage performance-based rules
Answer: B
NEW QUESTION 55
What are two purposes of a vSAN storage policy (Choose two.)
- A. To enable TRIM/UNMAP
- B. To determine vSAN encryption level
- C. To enable deduplication and compression
- D. To define how the VM storage objects are provisioned
- E. To guarantee the required level of service
Answer: D,E
NEW QUESTION 56
A vSAN administrator is implementing deduplication and compression on a vSAN all-flash cluster but wants the VMs to remain operational. The details are as follows:
There are 4 nodes in the vSAN cluster.
Existing VMs use a RAID-5 storage policy.
Which action should the vSAN administrator take to meet this goal?
- A. Enable TRIM/UNMAP.
- B. Change the existing VM storage policy to RAID-6.
- C. Use explicit fault domains.
- D. Use the Allow Reduced Redundancy option.
Answer: D
NEW QUESTION 57
A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleagues inquire about the Operations Reserve option.
What is the purpose of using this option?
- A. Configures space for external operations
- B. Allocates space forvSAN upgrades
- C. Provides space for internal operations
- D. Reserves space for tolerating failures
Answer: C
NEW QUESTION 58
......
5V0-22.21 Exam Dumps - PDF Questions and Testing Engine: https://itexambus.passleadervce.com/VMware-Specialist-vSAN-2021/reliable-5V0-22.21-exam-learning-guide.html