2023 100% Free NS0-176 Daily Practice Exam With 141 Questions
NS0-176 exam torrent Network Appliance study guide
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
NEW QUESTION 57
When creating local user, which two are valid user names? (Choose two)
- A. root
- B. 1greatuser
- C. 0
- D. daemon
- E. best_user
- F. somebody
Answer: E,F
NEW QUESTION 58
Which set of commands maps VLAN 100 to VSAN 100?
- A. Nexus 5000-A#configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-A (config)# vsan 100 Nexus 5000-A (config-vsan) # fcoe vsan 100
- B. Nexus 5000-A#configure terminal Nexus 5000-A (config) # vlan 100 Nexus 5000- A (config-vlan_ #fcoe vsan 100
- C. Nexus 5000-B# configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-B (config-vsan)# vsan 100 Nexus 5000-B(config- vsan) #vsan 100 name FCoE-VLAN 100
- D. Nexus 5000-B# configure terminal Nexus 5000-B(config-vsan) # vlan 100 Nexus 5000-B (config-vsan)# vsan 100 name vsan100
Answer: B
NEW QUESTION 59
When using Clustered Data ONTAP 8.1 and later, what is the default for new aggregates?
- A. Vserver aggregates
- B. traditional aggregates
- C. 32-bit aggregates
- D. 64-bit aggregates
- E. 128-bit aggregates
- F. cluster aggregates
Answer: D
NEW QUESTION 60
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight.
In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
- A. Activate the API Gateway in ONTAP System Manager.
- B. Deploy Active IQ Unified Manager.
- C. Activate the API Gateway in Active IQ Unified Manager.
- D. Get an Intersight Essentials tier license.
- E. Get an Intersight Advantage tier license.
Answer: B,C,E
NEW QUESTION 61
An administrator has a Flexpod solution configured to use VMware vSphere 6.0. All virtual machines will reside on NAS datastores. Certain critical virtual machines have a requirement to use eager-zeroed thick provisioning.
In this scenario, which VMware capability should the administrator enable to satisfy the performance requirement?
- A. NetApp NFS VAAI
- B. datastore clustering
- C. VMware VMFS VAAI
- D. Storage I/O Control
Answer: C
NEW QUESTION 62
There are 2 chassis tied to a pair of Fabric Interconnects.
First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links.
Which statement is true?
- A. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
- B. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
- C. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
- D. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
Answer: C
NEW QUESTION 63
Which two operating modes are available with the Nexus 9000 Series switches? (Choose two.)
- A. Cisco IOS
- B. Cisco ACI
- C. Cisco NX-OS
- D. Cisco IOS EX
Answer: B,C
NEW QUESTION 64
An administrator has a FlexPod solution for use with a VMware vSphere 6.0 environment. The virtual environment consists of virtual machines running both Windows Server 2012 R2 and Windows Server 2008.
The administrator determines that the Windows Server 2008 virtual machine VMDKs are misaligned. The problem needs to be solved without incurring downtime on the virtual machines.
Which tool enables the administrator to solve the problem without virtual machine downtime?
- A. NetApp mbralign toolkit
- B. NetApp Virtual Storage Console
- C. UCS Central
- D. VMware vRealize Operations
Answer: A
NEW QUESTION 65
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
- A. LACP
- B. APIC
- C. VSM
- D. spine switch
Answer: B,D
NEW QUESTION 66
Which three are characteristics of a NAS data LIF? (Choose three.)
- A. It can be associated with an IP address.
- B. It can be associated with a Fibre Channel port.
- C. It can be associated with a WWPN
- D. It can be associated with an Ethernet port or VLAN interface.
- E. It is associated with the management LIF.
- F. It can be associated with an interface group (ifgrp).
- G. It is associated with the administrative Vserver.
Answer: A,D,F
NEW QUESTION 67
For a 'boot from SAN' configuration, which two features must be enabled? (Choose two)
- A. FCSP
- B. FCOE
- C. UDLD
- D. FC
- E. VPC
- F. NPIV
Answer: B,F
NEW QUESTION 68
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Thick Provision Lazy Zeroed
- B. Full Provision
- C. Thin Provision
- D. Thick Provision Eager Zeroed
Answer: D
NEW QUESTION 69
Exhibit:
An administrator is building a FlexPod configuration with UCS 6296 Fabric Interconnect devices that support legacy Fibre Channel 9FC) connections. The administrator uses UCS Manager to configure the unified ports on the Fabric Interconnect.
Referring to the exhibit, how many ports will FC use after the configuration is completed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 70
Exhibit:
Your customer has a FlexPod VMware solution deployed with NFS datastores. As shown in the exhibit, the links between the Fabric Interconnects and storage controllers are single-mode interface groups with autorevert set to true, hosting a single access LIF. NFS I/O is currently going through fabric A to ST-A. The customer wants to use both fabrics for NFS I/O.
In this scenario, what will accomplish this task?
- A. Migrate the existing LIF that is used for NFS I/O on ST-A to its HA partner ST-B.
- B. Add two physical links between SW-A and SW-B.
- C. Configure VMware hosts to utilize an NFS LIF on ST-B that is connected to fabric A.
- D. Configure VMware hosts to use a new datastore with an NFS LIF on ST-B connected to fabric B.
Answer: D
NEW QUESTION 71
Refer to the exhibit.
Which is correct for configuring FCoE?
- A. fcoe vsan 43int po21switchport trunk allowed vsan add 43vsan databasevsan 43
- B. fcoe vlan 33int po11switchport trunk allowed vlan add 33vsan databasevsan 33
- C. vlan 33fcoe vsan 43int po11switchport trunk allowed vlan add 33int vfc11bind interface po11switchport trunk allowed vsan 43vsan databasevsan 43 interface vfc11
- D. vlan 33fcoe vsan 43int po21switchport trunk allowed vsan add 43int vfc11bind interface po21vsan databasevsan 43 interface vfc 11
- E. fcoe vsan 43int po11switchport trunk allowed vsan add 43vsan databasevsan 43
Answer: C
NEW QUESTION 72
Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS domains?
- A. UCS Performance Manager
- B. UCS Central
- C. UCS Director
- D. UCS Manager
Answer: B
NEW QUESTION 73
Which two are characteristics of a Fibre Channel SAN data LIF? (Choose two.)
- A. It can be associated with an interface group (ifgrp).
- B. It can be associated with an IP address.
- C. It can be associated with a Fibre Channel port.
- D. It can be associated with a WWPN.
- E. It can be associated with an Ethernet port or VLAN interface.
- F. It is associated with the management LIF.
- G. It is associated with the administrative Vserver.
Answer: C,D
NEW QUESTION 74
Which two database types are supported with the VMWare vCenter 6.0 Server Appliance? (Choose two.)
- A. vPostgres (embedded)
- B. Oracle
- C. Microsoft SQL Server Express
- D. Microsoft SQL Server Enterprise
Answer: A,B
NEW QUESTION 75
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- B. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- C. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
- D. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
Answer: B
NEW QUESTION 76
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco Nexus 9396PX
- B. Cisco MDS 9250i
- C. Cisco Catalyst 6504
- D. Cisco Catalyst 9300-48P
Answer: A,B
NEW QUESTION 77
......
NetApp NS0-176 Exam Certification Details:
| Passing Score | 68% |
| Exam Code | NS0-176 FlexPod |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
Use Valid New NS0-176 Test Notes & NS0-176 Valid Exam Guide: https://itexambus.passleadervce.com/Cisco-and-NetApp-FlexPod/reliable-NS0-176-exam-learning-guide.html